Hitachi VT-M282A Portable DVD Player User Manual


 
Basic Operations (VCR Plus + Recording)
44
memory. This brings up another screen:
5. Press number buttons 1, 2, or 3 to select ONE TIME, DAILY, or WEEKLY RECORDING.
Important: Programming does not take effect unless you select one of these options.
6. When the next screen comes up, choose between standard or extended tape speed by pressing
the TAPE SPEED button. This is also a good time to check the channel number-- it should be the
one on which you usually watch the program at home. (If not, you need to check your VCR
Plus+ channel setup.)
7. Review the screen to be sure everything is set as you want, then press GUIDE to complete
your programming or continue with additional programs.
When you have set up all the timed recordings you want:
• Don't forget to load a videocassette (with the safety tab still attached) to record on.
• If you have a cable box hookup with an A-or-B switchbox, set the switchbox to the proper
connection for the programs you are recording (through the cable box for scrambled premium
channels, direct cable for all other channels).
Important: Your timed recording settings take effect when you turn off the power on the VCR.
Caution on the VCR Plus+ recording
The VCR Plus+ feature allows you to program the VCR for timer recording by simply entering a
PlusCode number up to 8 digits. To prevent erroneous channel and/or time recording.
After entering a VCR Plus+ number, check the information displayed with the "PROGRAM
REVIEW", if there is (are) any unnecessary program(s), please cancel or correct it (them).