Hitachi VT-M282A Portable DVD Player User Manual


 
Basic Operations (Recording)
37
Now fill in the blanks:
• Select channel 8 by pressing 0 and 8 on the remote control.
• Enter the start time by pressing 0, 6, 0 and 0 for 6 o'clock. Then press 2 for PM.
• Enter the end time, half past six, as 6:30. The VCR automatically selects PM for you.
• The screen shows today's date, so no changes are needed on that line.
• Press TAPE SPEED to switch to SP because you want the best quality picture for this
recording.
Everything is as you want it, so press GUIDE to set the program in memory.
Insert a videocassette, and power off the VCR. Check for the delayed recording indicator on the
VCR's display. Prepare to admire yourself on the evening news.
Reviewing What You Have Programmed
You can look back over any of the recordings you have preset, and if you need to, clear out any
of the programs. Normal programs will clear automatically once recording is complete, but daily
and weekly settings must be cleared out manually.
• Press GUIDE, then press 3 for the PROGRAM REVIEW option. This brings up the screen
settings for Program 1. Keep pressing 3 to cycle through all the programs you have preset.
• To remove a program, press CLEAR. The screen will display the next program, if there are
more, or it will switch back to the main menu.
Programming Priorities
When you have set up several timed recordings, it may occur that some of their times overlap.
For example, this can happen if your VCR are set up to record shows on a daily or weekly basis,
and a special show comes on that you try to record during the same time slot.
The following charts will help you visualize how the VCR prioritizes the preset recordings. The
darker portions are program segments that would be recorded.
Shows with Same Starting Time: By Program number
If the overlapping programs start at the same time, the VCR records in order by program number
(1-8). If the shows are all scheduled to start at 7 AM, the VCR starts with program 1 at 7 AM,
switches to what remains of program 2 when program 1 is done recording, and so on.