Filter
Top Products
Advanced Operations (Cable Box Hookups)
56
Option 1 - All Channels Scrambled
1. Remove the cable company's cable line from the back of your TV. Connect it to the
IN FROM ANT lower jack on the back of the VCR.
2. Using the 75 ohm coaxial cable supplied with your VCR, connect either end to the
VCR's OUT TO TV upper jack.
3. Connect the other end of the 75 ohm cable to the TV, in the same place where you
removed the cable line.
Check all the TV and VCR functions. If you don't get all the functions you want, precede
with Option 2.
Option 2 - All Channels Unscrambled
1. Remove the cable company's cable line from the back of the cable box that goes to
your TV. Connect it to the IN FROM ANT lower jack on the back of the VCR.
2. Using the 75 ohm coaxial cable supplied with the VCR, connect either end to the
VCR's OUT TO TV upper jack.
3. Connect the other end of the 75 ohm cable to the TV, in the same place where you
removed the cable line.
Check all the TV and VCR functions. If you don't get all the functions you want, precede
with Option 3.