Filter
Top Products
Basic Operations (VCR Plus + Recording) .
48
program guide to your list of channels that you receive at home.
If any channel numbers don't match, follow the steps (page 43) to assign your local
channel numbers to VCR Plus+ numbers.
Cable (No Cable Box)
This is the channel setup to use if your VCR is hooked up directly to cable without a
cable box.
Compare your local TV channel listing to your cable company's channel directory to find
channels that need to be assigned to the VCR Plus+ codes.
For example:
In the example above none of the cable channels match, all of them need to be
assigned to VCR Plus+ channel codes.
Matching Broadcast CH Numbers to VCR Plus+ Channels
1. Press GUIDE, then press 4 to select VCR PLUS SETUP.
For Home Antenna Setup
You will see the screen as shown below.
For Cable (No Cable Box) Setup
First, the question "Is a cable box being used with the VCR for all channels?" will
appear when you press 1 to answer "NO", you will then see this screen, as shown
below.
2. A small arrow points to a blank "--" in the CHANNEL column. If your broadcast
channel number is the same as the VCR Plus+ channel in your TV listing, do not enter
any number. Press CHANNEL up or down to position a nonmatching station next to the