Filter
Top Products
Basic Operations (VCR Plus + Recording) .
49
arrow.
3. If your broadcast channel number is not the same as the VCR Plus+ channel in your
TV listing, use the number buttons to assign the broadcast channel to the corresponding
VCR Plus+ channel.
If you enter a wrong digit, press CLEAR and enter the correct one.
In the example below broadcast channel #38 is assigned to VCR Plus+ channel #42.
4. Repeat step 3 for all channels that need to be assigned.
5. Press GUIDE to end the setup procedure. You are ready to begin delayed recording
with VCR Plus+.
Cable with a Cable Box Setup
Use this setup procedure if you receive all channels through a cable box. Before you
begin, you need to know the output channel for your cable box. Usually this is either 03
or 04, but it could be 02 through 13. Consult your cable company if you're not sure.
1. Press GUIDE, then press 4 to select VCR PLUS SETUP.
2. Press 2 to answer "YES" to the question "Is a cable box being used with the VCR for
all channels?" You will then see this screen:
3. Use the number buttons to enter the cable box's output channel.
4. Press GUIDE to end the setup procedure. You are ready to begin delayed recording
with VCR Plus+. (When you set up a delayed recording, you will need to selec the
desired channel using the channel selector on your cable box.)
Cable with a Cable Box and Switchbox Setup
This is the right setup if you used Option 3 in the cable box hookups covered in
Advanced Operations. With that hookup you have an A-or-B switchbox because you
receive: