Filter
Top Products
Getting Started (Controls)
22
device you are controlling at the moment.
Remote Control Illustration
Remote Control Buttons
POWER Turns the VCR on and off.
VCR1, TV CATV, VCR2 Device buttons let you set the remote to control one of four
devices.
MUTE Turns off the audio until you press MUTE again.
VOLUME Increase or decrease the audio volume.
REW Rewinds the videotape.
PLAY Starts playing a loaded cassette.
STOP Stops a videocassette from playing, recording, pausing, rewinding - or anything
it is doing.
GUIDE Brings up an on-screen setup and programming guide, the Easy Guide System.
TAPE SPEED Switches between standard play (SP) and extended play (EP).
SLOW SPEED Plays back in adjustable slow motion.
AVX Used for recording from an auxiliary input such as a stereo system.
GO-TO/INDEX Used for marking and searching for specific tape locations.
EJECT Unloads a cassette tape from the VCR.
LAST CHANNEL Switches to the TV channel you watched previously during the
current viewing session.
CHANNEL Top button switches to the next higher channel, bottom button switches to
the next lower channel. For these to operate, you must have preset your channels.
REC Starts recording on the station the VCR is set to.
F.FWD Fast forwards the videotape.
PAUSE/STILL Temporarily stops the cassette from recording or playing. Press PAUSE
again (or PLAY) to resume.
F.ADV Lets you advance the tape frame by frame.
CLEAR/DISPLAY Used in on-screen programming and indexing.