Filter
Top Products
76
Freecom MediaPlayer Drive-In
GB
3
3.10 Others
3.10.1 Music Slide Show
Make a 'music' folder (in a small letter not a capital letter) in the root directory
of built-in HDD and save MP3 files in this folder. If the HDD is divided into two
or more partitions, make a 'music' folder at first partition. When you play one
or all photo files, you can listen to mp3 and see photo slide show together.
However, if you use the device with a networking computer (not built-in HDD),
you cannot listen to MP3. In this function, the player only detects MP3 files at
built-in HDD's music folder.
3.10.2 MP3 Quick Play
This is for listening to MP3 files without the use of a TV set. Make a 'music'
folder (in a small letter not a capital letter) in the root directory of built-in HDD
and save MP3 files in this folder. If the HDD is divided into two or more
partitions, make a 'music' folder in the first partition. Turn on the player and
just press [PLAY/PAUSE] button. The MP3 files at 'music' folder will be played
automatically. Additionally, after rebooting the Network MediaPlayer-35
drive in kit, the last played file will continue to play.
However, if you use the device with a networking computer (not built-in HDD),
you cannot listen to MP3. In this function, the player only detects MP3 files at
built-in HDD's music folder.
3.10.3 Change Background Image
It is possible to change a background image on the player. Select a picture file
and save it as 'mybg.jpg' in the root directory of built-in HDD. Background
image will be changed as 'mybg.jpg'.
We Recommend to use 720x480 pixels image.
3.10.4 Firmware Upgrade
The firmware of this device can be upgraded. You can find the latest firmware
upgrade files at
www.freecom.com/support. We recommend you to save the
firmware file in a specially created folder, for instance "Firmware". After
connecting the device to a TV set, move to the upgrade file and press [ENTER].
Upgrade is progressed automatically.
After finishing upgrade, you can check firmware version on Setup screen. Press
[SETUP] button. Do not turn off the power during firmware upgrade !!!