Filter
Top Products
15
GB
1
8. Select Option 1 "(Create primary DOS partition)" by pressing '1' and
confirm with 'Return'.
Wait until drive integrity is completely checked.
9. If only one partition is required then answer "Y" to the question: "Do you
wish to use the maximumavailable size for a Primary DOS partition?" If
more than on partition is required go to the next section "Create two or
more partitions on the Network MediaPlayer-35 drive in kit under Windows
98 / Windows ME".
Now the whole disk will be partitioned as one primary partition. Wait until
the drive integrity check is completed.
10. Press the 'ESC' key to return to the fdisk options.
11. Now press the 'ESC' key to close the "fdisk window".
Your hard disk is now
partitioned.
12. Stop your hard disk by using the hot unplug icon in the lower right corner
of your screen and remove the USB cable from your hard disk. Afterwards
connect your hard disk again with your computer. The hard disk will now
be recognized by Windows.
As Windows tries to access your hard disk an error message will appear. This
happens, because your hard disk is not yet formatted.
Creating two or more partitions on the Network MediaPlayer-35
drive in kit under Windows 98SE / ME
1. Repeat steps 1 to 7 from the previous chapter (Create one partition on the
Network MediaPlayer-35 drive in kit under Windows 98SE/Windows ME).
2. Answer the question "Do you wish to use the maximum available size for
a primary DOS partition?" with "N".
3. Enter either the size or a percentage value for the partition size. Press
'Return' and wait until the drive integrity check is completed.
Use as External USB HDD