Filter
Top Products
2.4 Powering the IFL
7870 Interfacility Link Installation and User’s Guide page 11
Foxcom proprietary information
2.4 Powering the IFL
• Transmitter power requirement: +14 VDC @ 200 mA
• Receiver power requirement: +14 VDC @ 250 mA.
• The Standalone Transmitter/Receiver is powered by a Foxcom
supplied external DC power supply.
• The Rackmount Transmitters/Receivers are plugged into the
rackmount chassis. The chassis can accept and power up to eight
units.
Note At temperatures below10°C, the Transmitter’s internal heater
will require an additional 100 mA. The Transmitter’s total
power requirement will then be 300 mA.
Caution Ensure that there is a good airflow around the chassis
rackmount.