FOCUS Enhancements FS-5 2.0 MP3 Player User Manual


 
Metadata
FS-5 2.0 User Guide Addendum
38
Entering Metadata
Metadata may be entered into a single FS-5 or simultaneously into
multiple FS-5s.
These procedures assume that there is a ready to use template, such
as the
FCP Example or AVID MXF that are supplied with the FS-5. And
that it is not necessary to modify or create a new template.
Logging Metadata to Multiple 2.0 FS-5s
The FS-5 provides the ability to simultaneously log the same
metadata to multiple FS-5s located on the same network.
To log metadata onto multiple FS-5s:
1. Begin by mounting at least two FS-5 2.0 units on a network.
2. Select one of the FS-5s to be the host.
3. Log on to the host and go to its
Entry page.
4. Select the metadata template to use from the
Default
Template
dropdown list.
5. Click the
ADD button.
The Link Units workspace expands to show link parameters
for the first client FS-5.
Notice that the
Template option is permanently check-
marked. Any time the host FS-5 links to another unit, it
transfers the currently selected template to the client,
regardless if the other link options are selected or not.
6. Enter the
IP address for the client FS-5.
4
5
7
8
9
10
6