Filter
Top Products
Quick Start
FS-5 2.0 User Guide Addendum
23
7. Now the FS-5 will respond to the camcorder’s tape
controls. The recording signal goes both to the tape in the
camera and to the FS-5.
Recording Timecode in the File
1. Press the Right soft button once and OPERATION menu
appears.
2. Press the
Down soft button several times to locate the
TIMECODE option.
3. Select
EXT TC in the SETUP menu.
This option records the video camera timecode in the
file. For other available timecode options refer to
TIMECODE on page 102.
To view the source timecode (TC) from the camera,
press the
DISP key, F2 default, until the format type
appears, e.g. 1080/60i TC.
EXT TC
When in EXT TC mode the FS-5 follows the camera’s
timecode, and the Drop/Non-Drop Frame in SETUP
menu has no effect on the recorded video's timecode.
Function keys
The tasks discussed above are available for
programming into the function keys. For information on
setting up function keys, refer to the section,
FUNCTIONS Menus in the user guide.
OPERATION
TIMECODE
EXT TC
FREE RUN
REC RUN
REGEN