Filter
Top Products
Pre-Programmed Keypad Key
1. Press the pre-programmed key and the display will
indicate
SQLCH=xx
, where "xx" is the value between
1 and 16.
2.
Use the RAMP control or to scroll
through the values. Then press the key to
save the new value or wait for the display time-out (2
seconds). The displayed value will be selected and
saved.
3. If the CLEAR button is pressed before the time-out,
the squelch level will not be updated and the original
value will be restored.
RECEIVING A CALL
1. Turn on the radio by rotating the POWER ON-
OFF/VOLUME knob clockwise (out of detent). A
short alert signal (if enabled through programming)
indicates the radio is ready to use.
2. Adjust the POWER ON-OFF/VOLUME knob to the
desired volume level.
3. Select the desired conventional system and channel.
The display indicates the current conventional sys-
tem and channel names.
4. The radio is now ready to receive calls.
85