Filter
Top Products
dures are presumed to be starting from the normal
receive display.
METHOD 1: If system selection is programmed to the
SYSTEM/GROUP/CHANNEL knob, se-
lect a system by turning the SYS-
TEM/GROUP/CHANNEL knob to the de-
sired system number position (1-16). The
display registers the new system name on
line one. If the knob is moved to a position
greater than the number of programmed
systems, the highest programmed system
will remain selected.
METHOD 2: If system selection is programmed as the
primary function of and , se-
lect a system by pressing or
to scroll through the system list.
The display registers the new system
name on line one.
METHOD 3:
Press to enter the system select
mode and follow the selection mode rules
detailed earlier. If system selection is pro-
grammed to the SYTEM/GROUP/CHAN-
NEL knob, direct access to systems will
not be available. Presses of or
will scroll through different sets of
16 systems each (banks) if more than 16
systems are programmed into the radio.
The systems within each bank are then
selectable via the SYSTEM/GROUP/-
CHANNEL knob as described previously
in METHOD 1.
42