Filter
Top Products
4
Unpacking And Set Up
• Remove the unit from the carton, and remove all packing materials
from the unit.
• Save the carton and packing materials in case the unit ever needs to
be returned for service. Using the original carton and packing materials
is the only way to safely repack the unit for shipment.
• Remove any descriptive labels or stickers from the top or front of the
unit. Do not remove any labels from the back or bottom of the cabinet.
• Remove any small strips of tape that may have been used to prevent
the CD door from opening in transit.
• Press the CD door in the area marked OPEN/CLOSE button to open
the CD door and remove the ‘dummy CD’ protection card from the CD
player and discard it. Close the CD door.
• Unwind the FM wire antenna on the back cabinet and extend it to its full
length.
• Unwind the AC power cord and extend it to its full length.
• Place the unit on a stable, level surface such as a table, desk, shelf, etc
within easy reach of an AC outlet, out of direct sunlight, and away from
sources of excessive heat, dust, moisture or humidity.
PREPARATION FOR USE
CKD1100_052107.p65 21/5/2007, 10:444