Filter
Top Products
10
8.) When the correct ‘day’ (digit) appears on the display press the CLK.ADJ/PROG.
button once more to exit the clock-setting mode.
The display stops flashing and returns
to the correct time and the clock begins
to run.
IMPORTANT: After you press the CLK.ADJ/PROG. button you must make
your time adjustments within 10 seconds while the display is flashing. After 10
seconds the display stops flashing and no time adjustments can be made.
If this occurs you must begin with Step 2 above and start the time adjustment
process again.
NOTE: After the Clock is set, pressing the ALARM SET/DISPLAY Button
repeatedly will display the Alarm 1, Alarm 2, Week Day, Correct Time in
sequence.
CKD1100_052107.p65 21/5/2007, 10:4410