Filter
Top Products
XDVD8285 OPERATION
19
Touch to access AM/FM TUNER mode.
Touch to access XM mode, (Optional XM tuner must be connected to activate).
Touch to access CD/DVD mode, (CD/DVD must be inserted).
Touch to access CAMERA mode, if optional camera isn't connected,
"No Signal Detected" will be displayed.
Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first.) Refer
to page 81 for more details.
Touch to RETURN to previous screen.
Touch to access iPod mode, (Optional iPod must be connected to activate).
Touch to enter STANDBY mode, touch screen again or any button to resume
normal operation.
Note: VOLUME level can be controlled in STANDBY mode.
Touch to access AUXILIARY A/V INPUT mode.
Touch to access SD mode, (Optional SD card must be inserted).
Touch to access SCREEN SETUP menu.
Touch to access GENERAL SETUP menu.
Touch to access ASP Config menu.
Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function).
Touch to access MULTI-ZONE source menu.
Touch to access MAIN source menu.
The rotary encoder can also control touch screen functions from the main menu.
Select desired function rotating clockwise or counter-clockwise.
Press to confirm/ENTER.
•
•
General Operation - Main Menu
Main Menu Access
Touch Access Buttons
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
12)
13)
14)
15)
16)
Rapid Dial Rotary Encoder
14
13
12
11
10
9
8
1
3
L
There are three methods to access the MAIN menu:
Press MENU button on the front panel.
Press MENU button on the main remote control.
Touch the upper left corner of the touch screen.
•
•
•
2 4 5 6
7
5
15
16