Filter
Top Products
XDVD8285 OPERATION
17
Power On/Off
Mute
Mode
Optional Mode Selection
Volume
Audio Adjustment
(from front panel)
Audio Adjustment
(from remote)
Press to turn the unit on. Hold for 3 seconds to turn the unit off.
Press MUTE to silence the audio; 00 will appear in the OSD (On Screen
Display). Press MUTE again to cancel.
Press MODE to select between Tuner, Disc, iPod, XM, Camera, SD and Aux
AV inputs. Modes of operation are indicated in the OSD (On Screen Display).
XM tuner, iPod and SD card (all optional) must be connected/inserted to
appear in the MODE selection string.
Press the top left corner of the screen to display the OSD menu bar. Press
Tuner, Disc, iPod, XM, Camera, SD and Aux AV inputs in the MAIN menu
page to select the desired source.
Adjust VOLUME using rotary encoder or the VOL +/- buttons (00-40).
Press rotary knob for 3 seconds, then release. Press rotary momentarily to
advance to desired parameter to be changed.
Turn rotary Q or P to adjust to desired level. Press rotary to advance to next
selection, and press and hold to exit.
Note: 6-Channel audio is only
adjustable when "Full 6CH" mode
is selected. Refer to page 49 for
more details.
Press the SEL button. Press the p or q buttons on the remote to select an
item to be adjusted. Press or to adjust the desired setting. Press the
ESC button on the remote control to exit the audio control menu.
Notes: The Bass and Treble levels are only adjustable when EQ is set to
"User” mode. The Loud function compensates for deficiencies in sound
ranges at low levels. When the Loud function is on, LOUD is displayed in the
OSD.
ltem
A djustable Range
Master Volume
Front Left Channel Volume
Rear Right Channel Volume
Center Channel Volume
Subwoofer Volume
00 to 40
-10 to +10
Front Right Channel Volume
-10 to +10
Rear Left Channel Volume
-10 to +10
-10 to +10
-10 to +10
-10 to +10
6-Channel Audio Settings
00
L
00
00
00
00
R
R
F
L
2-Channel Audio Settings
General Operation