Filter
Top Products
56
© 2005 Directed Electronics—all rights reserved
2. Before inserting a SD/MMC card, press the button to turn off the
PMP3520, if power is on.
3. Insert your SD card or MMC card into the slot in the correct orientation.
4. Push down on the SD/MMC card to release the lock and card will come up
about 1/4" to allow easy removal of card. Remove card completely before try-
ing to push card back in so spring loaded latch mechanism can reset. Card
must be pushed down firmly (you will feel some spring tension) to latch. The
unit is shipped with a dummy card in the slot to keep the spring latch secure.
The dummy card must be removed before a memory card is inserted.
5. Press button to turn on PMP3520.
6. If your SD/MMC card has video, audio, or photo files in the inserted card,
change to appropriate mode to play or view them.
IMPORTANT: Before inserting or removing the SD/MMC card, turn the
power off to the PMP3520, otherwise files on the PMP3520 and
the card might be corrupted!
Signal Input and Output
You can view the PMP3520 signal output on a large video device, such as a TV
set, to share your enjoyment with a larger group. Also, you can input signals
from a video device to the PMP3520, and record the signal into files utilizing
the AV Recording function.
SD/MMC slot