Filter
Top Products
© 2005 Directed Electronics—all rights reserved
49
d
FM Radio
The PMP3520 contains an FM radio, follow the directions below for use:
1. Fist plug the earphones into the earphone jack. The earphones are also used
as the antenna for the PMP3520. A "Plug in Headphone!" momentary mes-
sage will appear, in step 2 below if they are not plugged in. Radio quality
will vary from different geographic regions and orientation of the PMP3520.
Disconnecting the earphones may cause radio static.
2. Push the Navigation button up or down to select FM Radio as shown in the
left-hand figure below, and then press the Navigation button in to display
the FM Radio shown as in the right-hand figure below.
❍ Search/Tuning FM Stations
3. Default (memory) stations showing on the top portion of the display (see
figure below). The bottom section shows the frequency tuning indicator
with a display of frequency and also the tuning method (scan or fine).
4. Push the Navigation button down to select Scan or Fine Tune. When Scan is
selected, an available station can be found by pushing Navigation key to
the right or left. If Fine Tune is selected, frequency bar will be adjusted by
0.1 MHz on each Navigation button left or right movement.
5. On scanning or tuning, the frequency tuned to is shown on display.