Filter
Top Products
Normal sprayer frame, without Height Adjuster. (Shown Above)
1. Mount the Boom Carrier Center Section (#1) to the Mounting Angles (#2) on the back of the sprayer
frame using four 3/8" x 2-1/2" square U-bolts (#3) and eight 3/8" nylon locknuts (#4). NOTE: The mounting
brackets (#2) may need to be turned in or out depending on sprayer frame width.
MOUNTING THE BOOM CENTER SECTION
3
3
4
2
1
3
4
2
3
Begin by attaching the center section of the boom to the sprayer. With the center section on the sprayer,
the boom can be assembled from the center section outward and final alignment made at that time.
Page 1