Filter
Top Products
Crestron MMK/WMKM-6X-DSW Mud Mount Kits for the TPS-6X-DSW
Mud Mount Kits for the
TPS-6X-DSW:
MMK-6X-DSW & WMKM-6X-DSW
Description
Mud Mount Kits are the preferred mounting option for the TPS-6X-DSW when the
cutout made in the drywall for docking station installation is too large. These kits
provide support for additional plastering that can be applied to hide large
irregularities in the cutout.
NOTE: If mounting into a material other than drywall (for example, wood lectern,
concrete or rock) use the cutout template, available in the post-construction kit
WMKM-6X-DSW. For concrete and rock mounting material, allow for proper
ventilation before mounting the TPS-6X-DSW.
There are two Mud Mount Kits. The MMK-6X-DSW is a pre-construction
accessory. Pre-construction refers to framed walls prior to hanging drywall. This
accessory must be used with either the Pre-Construction Mount Kit (PMK-6X-DSW)
or Back Box (BB-6X-DSW).
The WMKM-6X-DSW is a post-construction kit. Post-construction refers to framed
walls with drywall hung. This accessory is designed with a mounting plate so that it
can be placed anywhere on a wall without the support of a stud.
NOTE: Since the TPS-6X-DSW contains moving parts, mounting to a stud offers
more support and is therefore highly recommended. Although Crestron
®
offers the
post-construction WMKM-6X-DSW mounting option, a mounting option that is
secured to a stud, such as the BB-6X-DSW or PMK-6X-DSW is highly
recommended.
NOTE: If necessary, consult the latest revision of the TPS-6X-DSW Operations and
Installation Guide (Doc. 6708) for a complete list of mounting options. The
document is available from the Crestron website (
http://www.crestron.com/manuals).
Installation Guide – DOC. 6779A Mud Mount Kits for the TPS-6X-DSW: MMK-6X-DSW & WMKM-6X-DSW • 1