Filter
Top Products
SERVICE
• Have your power tool serviced by a qualified repair person.
• When servicing a power tool, use only identical replacement parts.
• Follow instructions in the Maintenance section of this manual. Use of
unauthorized parts or failure to follow Maintenance instructions may create a
risk of shock or injury.
SPECIFIC SAFETY RULES FOR CORDLESS MULTI-TOOL
• Never use your Multi-Tool to perform sanding or separating operations in
wet conditions.
• Always wear eye protection.
• Always wear ear protection during extended periods of operation.
• Always wear a dust mask if the operation is dusty.
• Wear protective gloves when changing application accessories. Application
accessories become hot after prolonged usage.
• Always inspect for and remove all nails, screws, staples, etc. before sanding.
• Always check walls and ceilings to avoid hidden power cables and pipes. A
metal detector (available separately) is very helpful for this purpose.
• Whenever possible, use clamping devices or other suitable means to secure
the workpiece to a firm surface.
• When working with the machine, always hold it firmly with both hands and
provide for a secure stance. The power tool is guided more securely with
both hands.
Keep your workplace clean. Blends of materials are particularly dangerous.
Dust from light alloys can burn or explode.
Avoid unintentionally switching on the tool. Ensure that the on/off switch is
in the OFF position before inserting the battery pack. Do not carry the power
tool with your finger on the on/off switch or insert the battery pack into power
tools that have the switch on.
• Do not open the battery. Danger of short-circuiting.
• Do not scrape wet or dampened materials (e.g. wallpaper) or on moist surfaces.
Penetration of water into the machine increases the risk of an electric shock.
• Do not treat the surface to be worked with solvent-containing fluids.
Materials being heated by the scraping can cause toxic vapors to develop.
• Exercise extreme caution when handling the scraper accessory. The
accessory is very sharp; danger of injury.
• Use only the original Craftsman accessories and the other accessories (Fein
and Rockwell Multi-Tool Accessories) available for this Mulit-Tool, no others.
61199 Manual_Revised_09 0310 Page 9