Filter
Top Products
SAWING Fig. 13
&
WARNING: Use sharp,
undamaged saw blades only.
Deformed, blunt saw blades or
saw blades that are otherwise
damaged can break.
WARNING: When sawing
light building materials, observe
the statutory provisions and
the recommendations of the
material suppliers.
_, WARNING: Plunge cuts
may only be applied to soft
materials, such as wood, gypsum plaster boards, etc.
_, WARNING: The sawing teeth are very sharp. Do not touch during mounting
and application.
To cut and remove damaged portions of plasterboard:
Make two sets of parallel cuts on around the the damaged section. Then use a
chisel (available separately) to break out the piece between the cuts.
SEPARATI NG
The Carbide Circular Adhesive
Removal Blade is designed to
cut out the grout around wall
tiles. It can also be used to cut
plaster, porous concrete
and masonry.
Put the Carbide Circular
Adhesive Removal Blade on
the cutting surface at 90 ° to the
workpiece, switch the tool on,
and apply with appropriate
pressure (Fig. 14).
Fig. 14
NOTE: When separating wall
tiles, take into consideration that the application tools/accessories wear heavily
when used for longer periods of time.
61199 Manual_Revised_09-0310 Page 21