Filter
Top Products
iAUDIO U3
26
Operation by Mode
1. Connect iAUDIO and computer with the USB cable.
2. Transfer (copy) the desired text fi le to iAUDIO.
3. Disconnect iAUDIO and PC.
4. After the player is turned on, select the text fi le stored in iAUDIO by browsing with the Navigator to read the fi le.
5. Move the lever towards +, - to move by line. Move the lever towards
◀
◀,
◀◀, ◀
▶
▶
▶▶▶
to move by page.
6.
To move to a specifi c location, press the lever to specify a location to move back to and then press the lever again..
7. To exit from Text Viewer mode, press the “REC” button.
-
Text fi les can be viewed while listening to music.
- Text fi les up to 240KB are recognizable.
■
Setting Section Repeat
Section Repeat allows you to set a specifi c part to listen repeatedly by playing that part..
1. In Digital AV mode, press the “REC” button at the start of the section to repeat during playback, then an A
◀
▶
icon will appear at the top status bar.
2. Press the “REC” button again at the end of the section to repeat and then the icon will change to A
◀
▶
B and
the section set will be played repeatedly.
3. To cancel section repeat, press the “REC”button again.
-
Only sections 1 second or longer can be set to be repeated.
- This function will be canceled if another track is selected or if you attempt browsing while setting section repeat,
- This function is only available for music fi les. Movie fi les cannot be set for section repeat.