Filter
Top Products
iAUDIO U3
15
6. Power Connection and Charging
2. Once connected, player
will automatically power on
and charge at the same time.
-
If this is either the fi rst time the player is used or has not been used for a long time, use the player after fully charging it with the AC adapter.
- For your safety, use the AC adapter supplied with the player.
- AC adapter is for both 110V and 220V, and is sold separately.
To charge iAUDIO U3, connect the player to a PC using a USB cable or
connect to the AC adapter.
1. Connect the AC adapter to
each outlet and the USB jack on
the player.
3. After the player is fully charged,
the following screen appears on
the LCD.
7. PC Connection and Charging
2. If properly connected, player will
start to charge while the following
screen appears on the LCD.
1. Connect the supplied USB cable
to the USB jack of the player and
your computer.
3. Check the recently added drive
from Windows Explorer.
-
If this is either the fi rst time the player is used or has not been used for a long time, use the player after fully charging it by connection to your PC.
- Install a separate driver for Windows 98 and 98 SE operating systems.
- This player can recognize up to 100 folders and 1000 fi les.
Before Use