Filter
Top Products
LTO
LTO
TM
20
Parameter & Functions Set-up Guide
Delay Unit
In Out
Compressor/Limiter Threshold Unit
Temperature Unit
Units
Utility Misc. Setup.
Output Meters
Temperature
LCD Contrast
: The options are uS (microseconds), ms (milliseconds), mm (millimetres) and m (metres). These
can be set separately for Input Delay and Output Delay, using the arrow keys to switch between and .
Use the rotary control to change the unit type.
: The options are dBu or V (Volts). Use the rotary control to change the
unit type.
: This relates to the temperature set as the ambient temperature when calculating delay
times. Use the rotary control to switch between Centigrade and Fahrenheit. Press ESC to quit the
submenu.
Select MODE NEXT x2 Press ENTER.
Press NEXT to switch between the submenu options. Press ESC to quit this mode.
: No action - function not applicable to the RM2.
: A feature retained from the pro audio version of the device. It allows the current in-car
temperature to be keyed in using the rotary control. The system uses this value to compensate for the
variation in the speed of sound transmission when calculating time delay. This is far more applicable to
professional PA applications, where it allows the delays to be set during the sound-check and adjusted
automatically at the time of the concert if necessary.
One car application could be in autosound competition, if the temperature inside the vehicle changes
dramatically from when the system was set-up. In reality the distances involved between speaker drive units
in the car will almost certainly make temperature changes insignificant - but that doesn't stop you from
impressing the hell out of the guy next to you who doesn't have a UCS PRO installed!
: Adjust the contrast of the display using the rotary control - sometimes useful to compensate for
different viewing angles.
Miscellaneous Setup (Utility Menu):