Filter
Top Products
LTO
LTO
TM
15
Parameter & Functions Set-up Guide
Select MODE NEXT x3 . Press ENTER.
You are first presented with the parameters relating to the Low-Pass Filter (LPF) of Output 1 (OP1) - see Fig.2.
Use the arrow keys to select each parameter: (default is ), and
. The selected parameter will flash to show it is editable. Adjust the setting by using the rotary
control.
(Fig.2): For each filter there are 10 options plus (i.e. filter bypass):
type ( ) with 6dB, 12dB, 18dB or 24dB per octave slope
type ( ) with 12dB, 18dB or 24dB per octave slope
type ( ) with 12dB, 24dB or 48dB* per octave slope
Choosing the Linkwitz-Riley 48dB/octave filter will reduce the number of EQ bands available on that Output
channel.
(Fig.3): For each of the filters, the crossover point can be set between 15.6Hz and
16kHz.
Edit Xover
Filter Type/Slope Thru Crossover Frequency
Signal Phase
Filter Type/Slope Thru
Butterworth But
Bessel Bes
Linkwitz-Riley LR
*
Crossover Frequency
Fig. 2
OP
1
2k00
LPF Bes
Hz
24
Fig. 3
OP
1
1k46
LPF
Thr
u
Hz 0
0