Filter
Top Products
9
3 . Quick Start Guide
Inserting a DVD disc
Align the center of the DVD disc with the center hole of the
DVD player. Gently press down on the DVD to snap the
disc into place. Close the player cover. Make sure that the
laser-emitting device is never bumped
or contaminated by dust, etc. When the
DVD player is not in use, try to keep
the cover closed as much as possible
to avoid contamination by dust.
Slide the side power switch to on/off
This switch is spring-loaded and will re-
turn to its middle position once
switched on. Sliding the switch once
again in the same direction will turn
power off.
The DVD player will immediately start
Playing the DVD program
When you want to stop , press the stop button and slide
the ON/OFF switch to the left to shut off power and then
close the cover.
In most cases, the DVD already inserted
into the player will begin playing automati-
cally when power is turned on. If you in-
sert a DVD and close the player cover
after turning on the power, the DVD
should also begin to play automatically.
To stop play, press the stop button. Remember to turn
off player power as well .
After pressing the stop button the loaded disc will con-
tinue spinning.
Press the (PLAY) button on the player face