Filter
Top Products
27
2
1
6. Remote Control Buttons
2
1
SHIFT + (Slow Motion)
Press the” SHIFT “key and then the “ “ key to switch the player into slow motion
mode. Press once for 1/2 speed and twice for 1/4 speed play. This function is valid
only for video discs and will not work with audio discs. In slow mode the audio
output will be disabled.
To cancel slow play, press the “ “key to resume normal speed play.
PREV/NEXT Key
Pressing the” “or” “keys will cause a CD to skip to the song immediately
previous or after the current. On a DVD or VCD the player will immediately skip to
the following or preceding chapter.
MARK Key
The following will appear on-screen when you press this key:
This command sets the start position for the memory function. While a disc is in
play, press the “ MARK “key to bring up the above symbol, then use the
or keys
to move the cursor over any one of the five positions to the right of the symbol.
Press “ ENTER “to confirm.
The current play time will be recorded, up to a maximum of five positions. If you
wish to skip forward to any one of the selected positions, again use the
or keys
to make your choice and then press ” PLAY ” to begin playing the selection. Posi-
tion memory will be erased automatically when a disc is removed from the player.
Please note that when you are playing a VCD, the play back control function must
be switched to off before position memory can be used. Please refer to page 40.