ASUS K8N-DLASUS K8N-DL
ASUS K8N-DLASUS K8N-DL
ASUS K8N-DL
4-154-15
4-154-15
4-15
F1:Help
↑↓ ↑↓
↑↓ ↑↓
↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit
→← →←
→← →←
→←: Select Menu Enter: Select Sub-menu F10: Save and Exit
Phoenix-Award BIOS CMOS Setup Utility
Main Advanced Power Boot Exit
Select Menu
Item Specific Help
Change the internal
clock.
System Time 15 : 30 : 36
System Date Wed, Feb 2 2005
Legacy Diskette A [1.44M, 3.5 in.]
Floppy 3 Mode Support [Disabled]
Primary IDE Master [None]
Primary IDE Slave [None]
Secondary IDE Master [None]
Secondary IDE Slave [None]
Third IDE Master [None]
Fourth IDE Master [None]
IDE Channel 4 Master [None]
IDE Channel 5 Master [None]
Base Memory xxxK
Extended Memory xxxxxxK
Total Memory xxxxxxK
4.3 Main menu
When you enter the BIOS Setup program, the Main menu screen appears,
giving you an overview of the basic system information.
4.3.14.3.1
4.3.14.3.1
4.3.1
System Time [xx:xx:xxxx]System Time [xx:xx:xxxx]
System Time [xx:xx:xxxx]System Time [xx:xx:xxxx]
System Time [xx:xx:xxxx]
Allows you to set the system time.
4.3.24.3.2
4.3.24.3.2
4.3.2
System Date [Day xx/xx/xxxx]System Date [Day xx/xx/xxxx]
System Date [Day xx/xx/xxxx]System Date [Day xx/xx/xxxx]
System Date [Day xx/xx/xxxx]
Allows you to set the system date.
4.3.34.3.3
4.3.34.3.3
4.3.3
Legacy Diskette A [1.44M, 3.5 in.]Legacy Diskette A [1.44M, 3.5 in.]
Legacy Diskette A [1.44M, 3.5 in.]Legacy Diskette A [1.44M, 3.5 in.]
Legacy Diskette A [1.44M, 3.5 in.]
Sets the type of floppy drive installed. Configuration options: [Disabled]
[360K, 5.25 in.] [1.2M , 5.25 in.] [720K , 3.5 in.] [1.44M, 3.5 in.]
[2.88M, 3.5 in.]
4.3.44.3.4
4.3.44.3.4
4.3.4
Floppy 3 Mode Support [Disabled]Floppy 3 Mode Support [Disabled]
Floppy 3 Mode Support [Disabled]Floppy 3 Mode Support [Disabled]
Floppy 3 Mode Support [Disabled]
This feature allows reading and writing of 1.2 MB (as opposed to 1.44 MB)
data on a 3.5-inch floppy disk. This is required to support Japanese
standard floppy drives. Configuration options: [Disabled] [Drive A]
4.3.54.3.5
4.3.54.3.5
4.3.5
Base/Extended/Total Memory [xxxxxxK]Base/Extended/Total Memory [xxxxxxK]
Base/Extended/Total Memory [xxxxxxK]Base/Extended/Total Memory [xxxxxxK]
Base/Extended/Total Memory [xxxxxxK]
The base memory, extended memory, and the total memory values are
auto-detected. These fields are not user-configurable.
Refer to section “4.2.1 BIOS menu screen” for information on the menu
screen items and how to navigate through them.