Filter
Top Products
ASUS K8N-DLASUS K8N-DL
ASUS K8N-DLASUS K8N-DL
ASUS K8N-DL
2-252-25
2-252-25
2-25
5.5.
5.5.
5.
CPU, front, and rear fan connectorsCPU, front, and rear fan connectors
CPU, front, and rear fan connectorsCPU, front, and rear fan connectors
CPU, front, and rear fan connectors
(3-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2,(3-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2,
(3-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2,(3-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2,
(3-pin CPU_FAN1, CPU_FAN2, FRNT_FAN1, FRNT_FAN2,
REAR-FAN1, REAR_FAN2)REAR-FAN1, REAR_FAN2)
REAR-FAN1, REAR_FAN2)REAR-FAN1, REAR_FAN2)
REAR-FAN1, REAR_FAN2)
The fan connectors support cooling fans of 350mA~2000mA (24 W
max.) or a total of 1A~3.48A (41.76 W max.) at +12V. Connect the
fan cables to the fan connectors on the motherboard, making sure that
the black wire of each cable matches the ground pin of the connector.
• Do not forget to connect the fan cables to the fan connectors. Lack
of sufficient air flow inside the system may damage the
motherboard components. These are not jumpers! DO NOT place
jumper caps on the fan connectors!
• The ASUS Smart Q-Fan function is supported using the CPU fans
(CPU_FAN1, CPU_FAN2) connectors.
• The chipset fan is synchronized with the CPU fans.
6.6.
6.6.
6.
Backplane SMBus connector (6-1 pin BPSMB1)Backplane SMBus connector (6-1 pin BPSMB1)
Backplane SMBus connector (6-1 pin BPSMB1)Backplane SMBus connector (6-1 pin BPSMB1)
Backplane SMBus connector (6-1 pin BPSMB1)
This connector allows you to connect SMBus (System Management
Bus) devices. Devices communicate with an SMBus host and /or other
SMBus devices using the SMBus interface.
K8N-DL
®
GND
Rotation
+12V
CPU_FAN1
REAR_FAN1
GND
Rotation
+12V
FRNT_FAN2
GND
Rotation
+12V
CPU_FAN2
FRNT_FAN1
GND
Rotation
+12V
REAR_FAN2
K8N-DL Fan connectors
GND
Rotation
+12V
GND
Rotation
+12V
CPU_FAN1
REAR_FAN1
FRNT_FAN2
CPU_FAN2
FRNT_FAN1
REAR_FAN2
K8N-DL
®
K8N-DL SMBus connector
BPSMB1
1
I2C_4_CLK#
GND
I2C_4_DATA#
+5VSB
FAN_PWM