Filter
Top Products
29
Projection - GB4308, GB5108
Press CH+/ - to adjust cross cursor vertically, and VOL+/ - to adjust horizontally
so that the red and blue cross cursor is lined with the green one , and the cross
cursor is lined with the green one , and the cross cursor becomes white.
* When “MAX” is displayed on the screen, it indicates that the adjustment
is maximum.
After completion of above adjsutment, press “1”, “2”, “3”, “4”, “6”, “7”,
“8” , or “9” to adjust the other points on the screen.
Repeat Step 2 and 3 to align the red or blue cross cursor with the green one.
To save the adjusted data, press POWER.
If you are not satisfactory with the adjustment result, do not press
POWER to save the data. Press “0” to load the factory- set data in order
to resume the previous status.
Press PIP STILL to exit convergence adjustment mode.
V CHIP sub-menu :
You may prevent children from watching programs not suitable for them, such as sexual or violence
program.
Press VOL+/ - to enter V Chip sub-menu. Four-digit password is required. The original password is
“6688”
3
4
5
6
Poor convergence line
Green reference line
Before adjustment After adjustment
Convergence line is aligned with
green reference line basically
Enter The Password
Press 0-9
X X X X
MENUS (continued)