Filter
Top Products
27
Projection - GB4308, GB5108
Audio Out sub-menu:
Using the System Menu
When Fixed is set to OFF, the volume output from your audio system can still be controlled by the projec-
tion TV’s remote control. When Fixed is set to ON, the volume output of the projection TV is fixed. Use
your audio receiver’s volume control to adjust the volume through your audio system.
Press MENU to enter System menu.
Press CH+/- to highlight the item to be adjusted.
Press VOL+/- to adjust parameters.
Language:You can switch the languages for the On-Screen-Display to English, French to Spanish.
Blue Back: Blue back ON/OFF
If “ Blue Back” is set to ON, the projection TV will display a soft blue backbround when no
signal received.
If “ Blue Back” is set to OFF, and even nosie dot will be displayed on the screen when no sig-
nal is in the TV mode, and the screen becomes dark when no signal is in the AV mode.
* “Blue Back” isn’t available for YPbrPr1 and YPbPr2. The screen background becomes black
without signal reception in YPbPr1 and YPbPr2.
S Ident: S-Video indentfication ON/OFF.
When it is set to ON, press VIDEO to skip the related AV (AV1,Av2 and FAV) if inserting the relat-
ed SVHS.
When it is set to OFF, pressing VIDEO cannot skip the related AV if inserting the related SVHS.
For example, when SVHS1 is inserted and “ S Ident” is set to ON, the projection signal source will
change in the following order by pressing VIDEO (AV1 is skipped)
CHANNEL NO. SVHS1 AV2 SVHS2 F AV
YPbPr2 YPbPr1 F SVHS
Fixed ON
AV Level 60
Language English
ON
ON
T4
Blue Back
S Ident
CCD
Convergence
Vcmo
MENUS (continued)