Filter
Top Products
22
Instruction Manual
Allows you to display multiple channels and select one directly.
1 Press on the remote control to browse channel and press it again to
exit.
The first nine receivable channels will appear one after another.
2 When the channel becomes moving picture and channel number is yellow,
press VOL+/-, the selected channel will enlarge for normal viewing.
3 At the receiving interval of the first nine channel and second nine channel,
press CH+/- to select the channel that you wish to wiew. The selected channel
becomes moving picture and channel number is yellow, press VOL+/-, the
selected channel will enlarge for normal viewing.
* Browsing Channel will not function when “ Parental Lock” is set ot ON or in
AV mode.
Using Browsing Channel Function
Watching the Digital TV
When you have connected the DTV receiver, you can enjoy digital TV
programs. This projection TV is capable of receiving the 1080i,720p,480p
and 480i digital TV formats.
* This projection TV is not capable of display a native 720p format signal.
When a 720p format signal is received, it make down-conversion.
To view a digital TV program
1 Connect the DTV receiver to YP
B
P
R
1 or YP
B
P
R
2 on the projection TV
(for detail, see page 19).
2 Press VIDEO to select YPbPr1 or YPbPr2.
3 Select a digital channel on the DTV receiver. For detail, see the Opera-
tion Manual of the DTV receiver.
4 Adjust the volume of the projection TV as necessary.
* It is normal that OSD in 1080i is different from that in other modes.
FEATURES (continued)