Filter
Top Products
28
Instruction Manual
* When both AV-Video and SVHS are inserted , and “ S Ident ” is OFF, SVHS will prevail, and the
related AV-Video will display SVHS signal in monochrome. To watch AV-Video, unplug SVHS.
“OFF” Turns off Caption Vision.
“CC1,CC2,CC3,CC4” Displays a printed version fo the dialog or sound effects of a program.
(Should be set to CC1 for most programs).
“T1 ,T2 ,T3 ,T4” Display network/station information presented using either half of the
whole screen (if available). For closed captioning ,set to CC1.
“XDS” Display a network name, program name, program length, and time of
(eXtended Data Service) the show if the broadcast offers this cervice.
* If OSD appears on the screen, there is no CCD display.
* CCD function is not available in PIP, sub-picture in Double View, YPbPr1 and YPbPr2.
Convergence Adjustent
The projection tube image appears on the screen in three colore (red,
green and blue ).If they do not converge, the color is poor and the picture
blurs. Before you use your projectio TV, be sure to adjust the convergen-
ce. The convergences of the projection TVs have been adjusted before
they go out of factory. If you are not satisfactory, adjust the convergence
according to the following procedures.
* Unshielded speakers or other metallic objects can cause picture distor-
tion if placed close to the projection TV.
Press CH+/ - to highlight the item of Convergence in System Menu, and
press VOL+/ - to enter convergence adjustment mode.
1 Press “5” first to select the center point on the screen to be adjusted
shown as the following figure.
2 Press MENU to select red or blue convergence adjustment.
When four arrows on the lower left corner become red, it indicates red
convergence is ready for adjustment, and when they become blue, it indi-
cates blue convergence is ready for adjustment.
CCD:
MENUS (continued)