Filter
Top Products
54
ENGLISH
USING THE MM-RX400 PLAYER
Selecting the AREA setting
before you use the player
2,3,4
1
1
Radio broadcasts have different frequency
ranges and change in different steps in
different countries.
The player has two world reception areas:
US (North and South America) and EU
(Europe).
1 Press and hold the Multi Jog until
radio reception display appears
on the display.
2 Press and hold the AREA button
until “US” or “EU” flashes on the
display.
3 Press the AREA button repeatedly
to select the desired setting.
4 Press and hold the AREA button
until the radio reception display
appears again on the display.
Note
If you do not press the AREA button within
about 10 seconds after selecting your
desired setting, the former setting is
restored, and your selection is not
registered.
Listening to a radio program
(Manual Tuning)
Before listening to a radio program, make
sure the USB cable is not connected to
the MM-RX400 player. If it is, you cannot
expect satisfactory radio reception.
FM MODE
3
1,2
1
RADIO OFF
3
1 Press and hold the Multi Jog until
radio reception display appears
on the display.
2 Turn up or down the Multi Jog
repeatedly to tune in to your
desired station.