Filter
Top Products
ENGLISH
17
ENGLISH
5 Insert the supplied installation
CD-ROM into the CD-ROM drive
of your computer, then click on
the “Browse” button.
The “Open” dialog box appears.
6 Select an appropriate drive from
the “Drives” drop-down menu,
then click on “OK.”
7 Click on “Next” after confirming
that “AIWA MM-RX400” is listed
in the “Models” list box.
A window appears telling you that
Windows is ready to install the driver.
8 Click on “Next.”
The wizard begins copying the
necessary files to your computer. A
subsequent window appears when
copying of files is completed.
9 Click on “Finish.”
Confirming installation of the USB
driver
You can confirm if the USB driver is
successfully installed by the following
procedure:
1 Check that the MM-RX400 player
is connected to your computer
and turned on.
2 Point to “Settings” of the “Start”
menu, then click “Control Panel.”
3 Double-click on the “System” icon
to open the “System Properties”
dialog box.
4 Click on the “Device Manager”
tab.
5 Click on the mark of the
“Universal Serial Bus controllers”
item.
6 If “AIWA MM-RX400” is listed, the
USB driver is successfully
installed.