Filter
Top Products
ENGLISH
43
ENGLISH
Note
If you connect the USB cable to the
MM-RX400 player while it is in FM
radio reception mode, the player does
not detect that the USB cable has
been connected. Switch to the Memory
audio player mode by holding the
e/s button pressed or turn on the
player after turning it off.
3 Click on the “ copy to devices”
button to open the Copy to
Devices window if it is not already
open.
4 Click on to the right of the
“Media:” field and select “Internal
Memory (Flash)” or “External
Memory (MMC)” from the drop-
down list.
Note
If you select the MultiMediaCard as a
memory media, it takes more time to
finish transferring tracks.
5 Format the selected memory
media if necessary (page 46).
6 Click on the “Clear List” button if
any tracks are listed on the
Transfer List.
7 Click on the “Select Tracks From
Database” button.
The “Select Tracks From Database”
window appears.
Tip
If you have created a play list that
contains the tracks selected for
transfer, you can select the play list
from the “Select Playlists From
Database” window that can be opened
by clicking on the “Select Playlists
From Database” button.
8 Select the tracks that you want to
transfer to the MM-RX400 player
by clicking on the box to the left
of each track, then click on “OK.”
You will be notified if you have selected
too many tracks for the selected
memory media.
If this dialog box appears, you must
delete one or more tracks from the
Transfer List or Portable Track List
until the total size of the selected tracks
falls below the available memory of
the memory media.
9 Click on “Close” to close the
dialog box.
10Delete the tracks one at a time
until the red portion of the Device
Usage bar disappears (page 45)
by clicking on
after selecting
the track on the Transfer List or
Portable Track List.