13
SCANTEAM 6920 User’s Guide
Enabling or Disabling Track Configurations
1. Turn off power to the host PC.
2. Set MSR DIP switch position 8 to OFF.
3. Turn on power to the host PC.
4. Type the following keys: UTx<ENTER>
- where x" is the number 1 through 7. The number
controls the following:
1 = enable track 1,
2 = enable track 2,
3 = enable track 3,
4 = enable track 1 and 2,
5 = enable track 1 and 3,
6 = enable track 2 and 3,
7 = enable track 1, 2, and 3.
5. Turn off power to the host PC.
6. Set MSR DIP switch position 8 to ON.
7. Reapply power to the host PC.
Note: Triple track enable/disable options are not available with a two
track MSR.
Returning to Default Settings or Displaying a Summary of Commands
1. Turn off power to the host PC.
2. Set MSR DIP switch position 8 to OFF.
3. Turn on power to the host PC.
4. Type the following keys:
UR<ENTER> to return to default settings, or
UL<ENTER>to display a summary of commands.
5. Turn off power to the host PC.
6. Set MSR DIP switch position 8 to ON.
7. Reapply power to the host PC.
