11
SCANTEAM 6920 User’s Guide
Setting and Activating a Transmit Control Character
Some applications may require data from the MSR not be
transmitted automatically after each card swipe. Use this
programming feature to set a keyboard character that, when
pressed, will transmit MSR data to the host PC.
1. Turn off power to the host PC.
2. Set MSR DIP switch position 8 to OFF.
3. Turn on power to the host PC.
4. Type the following keys: UAEx<ENTER>
- where x" is:
any lower case letter (a to z),
any number (0 to 9),
any Function key (F1 through F12), or
the ESC, SPACE, [, ], or TAB keys.
5. Turn off power to the host PC.
6. Set MSR DIP switch position 8 to ON.
7. Reapply power to the host PC.
Deactivating and Eliminating a Transmit Control Character
Use the same procedure (above) to deactivate and eliminate a
transmit control character. The keystrokes (at step 4) are:
UAD<ENTER>
