10
SCANTEAM 6920 User’s Guide
Setting Keystroke Speed to 25, 40, or 60 Characters per Second
Use the same procedure as setting keystroke speed to 80 c/s" to
set the characters per second to 25, 40, or 60. The keystrokes (at
step 4) are:
US2<ENTER> for 25 C/S or
US4<ENTER> for 40 C/S or
US6<ENTER> for 60 C/S.
Setting Keyboard Type to XT
1. Turn off power to the host PC.
2. Set MSR DIP switch position 8 to OFF.
3. Turn on power to the host PC.
4. Type the following keys: UKX<ENTER>.
5. Turn off power to the host PC.
6. Set MSR DIP switch position 8 to ON.
7. Set MSR DIP switch position 2 to ON.
Note: Step 8 is required for XT keyboard type command (“UKX”) only!
8. Set MSR DIP switch position 1 to ON.
9. Reapply power to the host PC.
Setting Keyboard Type to PS/2 models 25/30/70 or AT–PS/2
Use the same procedure (above) to change from AT-PS/2 to
PS/2 models 25/30/70 type keyboards,,or from XT to AT-PS/2.
The keystrokes (at step 4) are:
UKP<ENTER> to change to PS/2 models 25/30/70 or
UKA<ENTER> to change to AT-PS/2.
