84
Parameter Value Explanation
Filter
Filter Type
Type of lter
OFF No lter is used.
LPF
(Low Pass
Filter)
This reduces the volume of all frequencies
above the cuto frequency (Cuto ).
BPF
(Band Pass
Filter)
This leaves only the frequencies in the region of
the cuto frequency, and cuts the rest.
HPF
(High Pass
Filter)
This cuts the frequencies in the region below
the cuto frequency.
PKG
(Peaking
Filter)
This emphasizes the frequencies in the region of
the cuto frequency.
Cuto 0–127
Frequency at which the lter begins to have an
e ect on the waveform’s frequency components
Resonance 0–127
Emphasizes the portion of the sound in the
region of the cuto frequency, adding character
to the sound.
LFO
LFO Rate 0–127 Modulation speed of the LFO
LFO Osc 1 Pitch
Depth
-63–+63
Depth to which the LFO will modulate the Osc
1 pitch
LFO Osc 2 Pitch
Depth
-63–+63
Depth to which the LFO will modulate the Osc
2 pitch
LFO Osc 1 Pulse
Width Depth
-63–+63
Depth to which the LFO will modulate the pulse
width of the Osc 1 waveform
* The Pulse Width is activated when “SQR” is
selected with Osc 1 waveform.
LFO Osc 2 Pulse
Width Depth
-63–+63
Depth to which the LFO will modulate the pulse
width of the Osc 2 waveform
* The Pulse Width is activated when “SQR” is
selected with Osc 2 waveform.
[3] ( EXP)
Parameter Value Explanation
Expression
Range Min 0–127
Lower limit of the range of the Active
Expression.
The e ect will be applied when the position of
your hand above the D Beam controller is lower
than this value.
Range Max 0–127
Upper limit of the range of the Active
Expression.
The e ect will be applied when the position of
your hand above the D Beam controller is above
this value.
* By setting Range Max below Range Min you
can invert the range of change.
127
Range Max
0
Range Min
[4] ( ASSIGN)
Parameter Value Explanation
User Assignable
Type
Function controlled by the D Beam controller
CC01–31, 33–95 Controller numbers 1–31, 33–95
BEND UP Controls the pitch.
BEND DOWN Controls the pitch.
USB SONG START The USB memory song player will start/stop.
RECORDER START The digital recorder will start/stop.
TAP TEMPO
Tap tempo (a keyboard tempo speci ed by
the interval at which you move your hand
over the D Beam controller).
AFTERTOUCH Produce the same e ect as aftertouch.
Range Min 0–127
Lower limit of the range of the D Beam
controller. The e ect will be applied when
the position of your hand above the D Beam
controller is lower than this value.
Range Max 0–127
Upper limit of the range of the D Beam
controller. The e ect will be applied when
the position of your hand above the D Beam
controller is above this value.
* By setting Range Max below Range Min
you can invert the range of change.
System Menu [6] ( INFORMATION)
Here you can view the JUNO-Gi’s software version.
