XP1024 Hardware 61
6 REMOTE
MAINTENANCE
ENABLE/DISABLE
Switch Used to permit remote service maintenance.
Disable: No one can provide maintenance
Enable: HP service representative can provide
maintenance.
7 STORAGE CLUSTER 1
CHANNEL A-R
ENABLE
LED
(Green)
Serial Channel/Fibre Channel:
(1) On: Indicates some of the logical paths are
established.
(2) Fast blinking: Indicates the corresponding channel
route is executing the channel command.
(Only Serial Channel)
(3) Slow blinking: Indicates none of the logical paths
are established.
(4) Off: Indicates the corresponding channel route is
not enabled.
8 STORAGE CLUSTER 2
CHANNEL A-R
ENABLE
LED
(Green)
Serial Channel/Fibre Channel:
(1) On: Indicates some of the logical paths are
established.
(2) Fast blinking: Indicates that the corresponding
channel route is executing the channel command.
(Only Serial Channel)
(3) Slow blinking: Indicates none of the logical paths
are established.
(4) Off: Indicates that the corresponding channel route
is not enabled.
Table 11. Control panel functions
Item Label Indicator Description
