A SERVICE OF

logo

1-40
40 | Setting Up the Printer
Connecting to Your System
You can use either USB or FireWire connections. Make sure your system has
the appropriate port, and you have a standard, shielded cable 10 feet long or
less.
1. Make sure that both the printer and the computer are off.
2. Plug the interface cable into the appropriate port on the printer.
3. Plug the other end of the cable into the appropriate connector on your
computer.
Note: Epson
recommends the
USB 2.0 or network
connection for the most
reliable performance.
USB cable (not included) FireWire cable (included)
FireWire connection
USB connection
7800-9800Guide.book Page 40 Monday, April 10, 2006 11:59 AM