5-128
128 | Maintaining and Transporting the Printer
When the red B ink light is flashing (and INK LOW appears on the LCD
display), the indicated cartridge is almost out of ink. Make sure you have a
replacement cartridge. When the light stays on and
INK OUT is displayed,
the cartridge is empty. You must replace the cartridge before you can
continue printing.
You can install any combination of 110 ml and 220 ml cartridges.
Use the following UltraChrome K3 Epson ink cartridges
:
You can purchase genuine Epson ink and paper from an authorized Epson
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766).
In the U.S., you can also purchase online at www.epsonstore.com. In
Canada, you can also purchase at www.epson.ca or 800-807-7766.
Before you start, make sure the printer is powered on. Then follow these
steps to replace an ink cartridge:
1. Note the color of the cartridge that is low or empty. This is the cartridge
you need to replace.
Slot no. Cartridge 110 ml 220 ml
1 Light Light Black T562900 T563900
2 Light Magenta T562600 T563600
3 Light Cyan T562500 T563500
4 Light Black T562700 T563700
5 Photo Black T562100 T563100
Matte Black T566800 T567800
6 Cyan T562200 T563200
7 Magenta T562300 T563300
8 Yellow T562400 T563400
Caution: To ensure good
results, use genuine
Epson ink cartridges and
do not refill them. Other
products may cause
damage not covered by
Epson’s warranty.
Caution: Leave the
empty cartridge in the
printer until you are ready
to replace it.
To prevent ink reporting
errors, never replace the
ink cartridges with the
printer turned off.
7800-9800Guide.book Page 128 Monday, April 10, 2006 11:59 AM
