EPSON Status Monitor 2 (for Windows 95 only)
Provides you with printer status information such as the
amount of ink remaining and checks for printer errors.
This utility is available only when:
You have installed the Status Monitor 2 (if not, see page
4-27),
The printer is connected directly to the host computer via
the parallel port LPT1, and
Your system is configured to support bidirectional
communication.
Note:
You can use the Status Monitor 2 utility that comes with the optional
EPSON Type B Ethernet Interface Card (must be installed) when
connecting over a network.
The online help included with the EPSON Status Monitor 2
utility provides you with detailed information about using
EPSON Status Monitor 2. Click
Help
in the Printer Status
window.
Nozzle Check
Checks the print head nozzles for clogging. Check the nozzles if
you notice a decline in print quality and after cleaning to
confirm that the print head nozzles have been cleared. In case
the nozzle check indicates the print heads need cleaning, you
can access the Head Cleaning utility directly from the Nozzle
Check utility.
L
Easter10 Ref. Guide
Rev.C
A5 size Chapter 4
1-07-98 DR, pass 2
4-16
Using the Printer Software for Windows
