A SERVICE OF

logo

Open as PDF
next previous
Using Power-On Functions
The functions below (in italics) are available if you hold down the
corresponding control panel buttons while turning on the printer:
LQ self test
=
E
load/eject button
Checks the paper length and prints a self-test at 360 dpi. See “Self testing”
on page 9-5.
Draft self test
=
Y
cleaning button
Checks the paper length and performs self-test printing at 180 dpi. See
“Self testing” on page 9-5.
Default setting
=
X
cleaning button
Enters the default-setting mode. See “Changing the Print Settings” in this
chapter.
Hex dump
=
E
load/eject +
X
cleaning buttons
Prints the data sent from the computer in hexadecimal code. See “Hex
dump mode” on page 9-7.
Print head alignment
=
E
load/eject +
Y
cleaning buttons
Enters the print head alignment mode. See page A-12 for details.
A
R
Easter10 Ref. Guide
Rev.C
A5 size Appendix A
1-07-98 DR, pass 1
Using the Printer with DOS
A-13