If you have a display-adapter setting
utility, use it to set lower resolution.
For detailed information, see your
display board user’s guide.
For Macintosh, choose
Control Panel
from the Apple menu and select
Monitors
. Select a lower resolution.
For detailed information on making
this setting, see your Macintosh user’s
guide.
A “SC 850 (or SC 850 (AT))cannot be used” error appears.
(Macintosh only)
Cause What to do
The printer driver has been
corrupted.
Remove and reinstall the driver: From
the printer software floppy disk or
CD-ROM, click
Installer
, click
Continue
, and select Remove from the
pop-up list that displays “Easy
Install.” Then click
Remove
. Click
Continue
, if necessary, and click
Restart
. See page 2-30 for instructions
on installing the printer driver.
Printing starts too high or too low on the page.
Cause What to do
Margins are set incorrectly in
your application.
Check that the margins are set
correctly in your program. See the
printable area specifications on page
C-6.
L
Easter10 Ref. Guide
Rev.C
A5 size Chapter 9
1-07-98 DR, pass 2
9-12
Troubleshooting
