A SERVICE OF

logo

Send documentation comments to mdsfeedback-doc@cisco.com.
Chapter 2 Installing the Cisco MDS 9216 Switch
Starting Up the Switch
2-18
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
Connecting the Power Supplies
The Cisco MDS 9216 Switch supports 845 Watt AC power supplies, shown in
Figure 2-8.
Figure 2-8 Power Supply for the Cisco MDS 9216 Switch
To provide power to an AC power supply, follow these steps:
Step 1 Plug the power cable into the power supply and tighten the screw on the power
cable retainer to ensure the cable cannot be pulled out.
Step 2 Connect the other end of the power cable to a power source.
1 Power switch 4 AC power connection
2 Power cable retainer 5 Captive screw
3 Power supply LEDs
94976
PWR-845-AC
100-240V 12-5A
50/60 Hz
INPUT OK
FAN OK
OUTPUT FAIL
ALL FASTENERS MUST BE FULLY ENGAGED
PRIOR TO OPERATING OF POWER SUPPLY
5
1
2 3
4