Send documentation comments to mdsfeedback-doc@cisco.com.
Appendix C Cable and Port Specifications
SFP Transceiver Specifications
C-10
Cisco MDS 9216 Switch Hardware Installation Guide
78-16165-01
Environmental and Electrical Specifications for Cisco Fibre Channel SFP
Transceivers
Table C-9 provides the maximum environmental and electrical ratings for Cisco
Fibre Channel SFP transceivers.
Notes:
1. Absolute Maximum Ratings are those values beyond which damage to the
device may occur if these limits are exceeded for other than a short period of
time. See Reliability Data Sheet for specific reliability performance.
2. Between Absolute Maximum Ratings and the Recommended Operating
Conditions functional performance is not intended, device reliability is not
implied, and damage to the device may occur over an extended period of time.
Cisco Gigabit Ethernet / Fibre Channel Transceivers
Table C-10 lists the combination Gigabit Ethernet / Fibre Channel (GE/FC) SFP
transceivers available through Cisco.
Table C-9 Maximum Environmental and Electrical Ratings for Cisco Fibre
Channel SFP Transceivers
Parameter Symbol Min. Max. Unit Notes
Storage Temperature T
S
-40 85 °C See note 1.
Case Temperature T
C
0 70 °C See notes 1, 2.
Relative Humidity RH 5 95 % See note 1.
Module Supply Voltage V
CC
T,R 3.1 3.5 V See note 1.
Table C-10 Cisco Gigabit Ethernet / Fibre Channel SFP Transceivers
Description Type
1 Gbps Ethernet and 1 Gbps/2 Gbps Fibre Channel-SW SFP, LC Short wavelength
1 Gbps Ethernet and 1 Gbps/2 Gbps Fibre Channel-LW SFP, LC Long wavelength
